F1 Model 812 Flexible Array Loudspeaker
Flex array is a flexible baffle that can be configured into four unique shapes (“Straight,” “C,” “J” or “Reverse J”), allowing the customer to choose the best possible coverage pattern for the application
Vertically oriented 8-driver mid/high line array, with each driver mounted on a custom 100° waveguide, helps deliver wide, consistent coverage
12-inch LF driver provides high performance at low frequency for strong low-frequency output
Bi-amplified design with 2 high-output, Class-D amplifiers to separately power the FLEX array and 12-inch LF driver
2 input channels with independent volume controls and Line Level/Mic switch on Channel 1
Frequency Response (+/-3 dB) | 52 Hz - 16 kHz |
Frequency Range (-10 dB) | 43 Hz - 20 Hz |
Nominal Dispersion | C: 100° H x 40° V |
Maximum SPL @ 1 m | 132 dB SPL (peak) |
Rated Power | 1,000 W |
Front View
Right View
Top View
Straight Pattern
Use the straight pattern when the audience is standing and their heads are approximately at the same height as the loudspeaker.
Reverse-J Pattern
The reverse-J pattern is good for an audience in raked seating that starts at loudspeaker height and extends above the top of the loudspeaker.
J Pattern
The J pattern works well when the loudspeaker is up on a raised stage and the audience is seated below on the floor.
C Pattern
Use the C pattern for raked seating in an auditorium when the first row is on the floor with the loudspeaker.